sales@jitaivalve.com    +86-577-86613556
Cont

Have any Questions?

+86-577-86613556

Jun 20, 2021

The development of ball valve applications due to change of seat material

6


The most important seat ring material for ball valves is polytetrafluoroethylene (PTFE), which is inert to almost all chemical substances, and has a small friction coefficient, stable performance, not easy to age, wide temperature application range and excellent sealing performance 


However, the physical properties of PTFE, including high expansion coefficient, sensitivity to cold flow and poor thermal conductivity, require the design of valve seat seals to focus on these characteristics. The plastic material of the valve seat seal also includes filled PTFE, nylon and many other materials. However, when the sealing material becomes hard, the reliability of the seal will be damaged, especially in the case of low pressure difference.


In addition, synthetic rubber such as nitrile rubber can also be used as a valve seat sealing material, but its applicable medium and temperature range drugs are limited. In addition, if the medium is not lubricated, the use of synthetic rubber is likely to jam the ball.


In order to meet the use requirements of industrial applications such as high temperature, high pressure, strong erosion, long life, etc., metal-sealed ball valves have been greatly developed in the past ten years. Especially in developed industrial countries, such as the United States, Italy, Germany, Spain, the Netherlands, etc., the structure of ball valves has been continuously improved, and fully welded body direct-buried ball valves and rising stem ball valves have appeared, making ball valves in long-distance pipelines, oil refining equipment, etc. The industrial field is more and more widely used. Ball valves with large diameter (3050mm), high pressure (70MPa), and wide temperature range (-196~815℃) have appeared, which brings the technology of ball valves to a whole new level.


Due to the application of computer-aided design (CAD), computer-aided manufacturing (CAM) and flexible manufacturing system (FMS) in the valve industry, the design and manufacturing of ball valves have reached a whole new level. It not only completely innovated the valve design calculation method, but also reduced the heavy and repetitive routine design work of professional and technical personnel, so that technicians have more energy to improve product performance and shorten the research and development cycle of new products, Improving labor productivity in an all-round way. In the process of research and development of rising stem metal-sealed ball valve, thanks to the application of CAD/CAM, the valve stem spiral flat made by computer-aided design and computer-aided numerical control machine tools appeared to make the metal seal The ball valve has no scratches and wear during the opening and closing process, so that the sealing performance and service life of the ball valve are greatly improved.


When the ball valve is fully opened, the flow resistance is very small, almost equal to zero, so the equal diameter ball valve is widely used in oil and gas pipelines because it is easy to clean the pipeline. Because the ball of the ball valve is wiped during the opening and closing process, most ball valves can be used in media with suspended solid particles. Depending on the material of the sealing ring, it can also be used in powder and granular media.


Send Inquiry