An annular groove is machined on the vertical bisector of the gate of the electric gate valve, so that the gate has a certain elasticity. It is this elastic deformation that, when the gate is closed, compensates for the deviation of the wedge angle between the sealing surface of the gate and the sealing surface of the valve seat, and achieves a good fit to ensure the sealing.
Name | Electric gate valves |
Type | pressure seal bonnet, flexible wedge, full port |
Nominal Size | 10'' , DN250 |
Nominal pressure | 2500lb |
Media | steam |
Working Temp. | 280 Deg C |
Body | cast steel ASTM A216 WCB |
Disc | cast steel ASTM A216 WCB |
Seat | F6a+Stellite |
Stem | ASTM A182 F6a |
Bolts/nuts | B7/ 2H |
Operation | electric operation |
Design | API 600, ASME B16.34 |
Face to face | ASME B16.10 |
Flanged End | ASME B16.5 |
Test | API 598 |
Delivery | 36 working days |
Painting | Expoxy |
Packing | Plywood Case |
MOQ | 1 Set |
Certificate | ISO9001, ISO14001,ISO45001, SIL, API 6D,CE |
Origin | Wenzhou, China |
Project | Mexico |
