Introduction:
Welcome to our company. We specialize in the manufacture and sale of pneumatic wedge gate valves, which are widely used in various industries such as petrochemical, power plant, papermaking, and sewage treatment. Our products are known for their high quality, reliable performance, and reasonable price. In this article, we will introduce our pneumatic wedge gate valves in detail, covering their features, advantages, applications, and other important aspects that potential merchants may find helpful.
Features:
Our pneumatic wedge gate valves have the following features that distinguish them from other types of valves:
1. Wedge Gate Design: Our valves use a wedge gate design that provides a tight seal even under high pressure or corrosive conditions. The wedge gate is made of high-strength materials that can withstand wear and tear over time.
2. Pneumatic Actuator: Our valves are equipped with a pneumatic actuator that can be controlled remotely, making them ideal for use in hard-to-reach areas or hazardous environments. The actuator is easy to operate and can be adjusted to suit different operating conditions.
3. High-Performance Seals: Our valves use high-performance seals that can withstand high temperatures, pressure, and chemicals. The seals are designed to prevent leakage and extend the service life of the valve.
4. Easy Maintenance: Our valves are designed for easy maintenance and repair. The wedge gate and seals can be easily replaced without removing the valve from the pipeline, saving time and effort.
Advantages:
Compared to other types of valves, our pneumatic wedge gate valves have the following advantages:
1. High Flow Capacity: Our valves have a large flow capacity, making them suitable for use in applications that require high flow rates.
2. Minimal Pressure Drop: Our valves have a minimal pressure drop, which means that they can maintain a steady flow of fluid even under high pressure conditions.
3. Low Operating Cost: Our valves have a low operating cost, thanks to their simple design and easy maintenance.
4. Long Service Life: Our valves have a long service life, thanks to their high-quality materials, robust construction, and reliable performance.
Applications:
Our pneumatic wedge gate valves can be used in a wide range of applications, including:
1. Petroleum Refining: Our valves are widely used in petroleum refining to control the flow of crude oil and other petroleum products. They are ideal for use in high-pressure and high-temperature applications.
2. Power Plant: Our valves are used in power plants to control the flow of steam and water in boilers, turbines, and other equipment. They are designed to withstand high-temperature and high-pressure conditions.
3. Papermaking: Our valves are used in paper mills to control the flow of pulp, chemicals, and water. They are ideal for use in corrosive and abrasive applications.
4. Sewage Treatment: Our valves are used in sewage treatment plants to control the flow of wastewater and chemicals. They are designed to withstand the harsh conditions of sewage treatment and can help improve the efficiency of the treatment process.
Conclusion:
In summary, our pneumatic wedge gate valves are a high-quality, reliable, and cost-effective solution for controlling the flow of fluids in industrial applications. With their wedge gate design, pneumatic actuator, high-performance seals, and easy maintenance, our valves can provide superior performance and long service life. Whether you are in the petrochemical, power plant, papermaking, or sewage treatment industry, our pneumatic wedge gate valves can meet your needs and exceed your expectations. Please do not hesitate to contact us if you have any questions or need further information about our products. We are always ready to assist you.
Introduction
Pneumatic actuated wedge gate valves have excellent shut-off performance due to a unique metal seating structure, reliable tightness, and extremely high efficient pneumatic actuation.
Features
1.OS&Y, bolted bonnet, Flexible or solid wedge;
2.Welded or integral seat with hardfaced alloy steel is more abrasion resistance
3.Ensured stem seals with flexible graphite packing and rugged gland
4.As the medium flows in a smooth and straight channel, the flow resistance is small;
5.Unobstructed channel permits the maximum flow rate;
6.Linear type pneumatic actuators offer smooth opening and closing
Scope
Nominal size | 2"~48"(DN50~DN1200) |
Nominal pressure | Class150~2500(PN10~PN420) |
Standard: | API 600, API 603, ASME B16.34, |
Body material | Carbon steel, Stainless steel, Alloy steel, Duplex stainless steel |
End connection | RF, RTJ, BW, |
Operation | Double acting, single acting |
Production
Our valves are manufactured with cutting-edge facility operated by devoted workers to guarantee our valves for critical requirement. As a fast-developing manufacturer, Jitai undertakes economic and intelligent valve manufacturing based on ERP management, involving principles of safety, efficiency and cleanliness.

Inspection
Jitai performs comprehensive inspection according to the latest industrial standards during the whole manufacturing activities. We won’t allow any non conformity item to be released once the unacceptable defect is found through our enhanced test procedures.

Maintenance
1.The air source should be kept dry and clean, and the air filter should be drained regularly;
2.Keep the air source pressure normal <0.4~0.7MPa>, and the power signal of the electrical part has circuit failure;
3.Prevent water ingress, and ensure the normal operation of the solenoid valve switch;
4.Under normal working conditions, check regularly with packing and replace if any leakage;
5.When installing the solenoid valve, pay special attention to whether the voltage meets the requirements;
FAQ
1.Q: Are you a manufacturer or trading company ?
A: We are a genuine valve factory to offer valves at acceptable cost and assured quality.
2.Q: Can you make tailored products ?
A: Yes, we can customize the valve design, manufacturing and inspection for our clients according to the drawing and technical datasheet.
3.Q: What is your MOQ and common delivery time?
A: Our MOQ is 1 set for general industry valves and 10 sets for customized valves. Delivery time is 7 working days for general valves and 40 working days for customized valves.
4.Q: Can you provide technical drawing and tender datasheet?
A: Yes, we are capable of dealing with tender orders under our brand in global areas. We offer one-stop technical support and send you quickest proposal once you become our longterm partner, agent and distributor.
5.Q: How can you help with our installation and start-up?
A: We offer complete literature, videos, operation manuals to give lengthy guidance. Furthermore, our technicians can be dispatched for site job as per the request.
Why choose us?
- We work closely with our suppliers to ensure that we source only the highest-quality materials for our products.
- We firmly believe that in the process of our continuous pursuit of innovative and excellent products and services, we will create a standard and ahead of the industry new image. At the same time, with your support, we will cooperate and develop together.
- We offer flexible payment options, making it easy for our customers to pay for their orders.
- Our customer service team is committed to helping users' Pneumatic Wedge Gate Valves play its due role in use as much as possible.
- We have a track record of delivering high-quality products and services across a range of industries and applications.
- Our company has built a pioneering and enterprising dynamic enterprise, which has laid a solid foundation for its products with high quality, high stability and high integration with customer demand.
- Our products come with a comprehensive warranty, giving you peace of mind and confidence in your purchase.
- The company insists on providing considerate services and helping you choose the most appropriate product solutions to meet your needs, and can also customize according to your requirements.
- We pride ourselves on our ability to deliver products quickly and efficiently.
- We are adhering to the management philosophy of 'treat others with courtesy, unity and dedication, striving for progress' and the corporate management culture of 'focusing on talents, management, and technology', and constantly deepen cooperation with customers to provide them with satisfactory products and service.
Hot Tags: pneumatic wedge gate valves, China pneumatic wedge gate valves manufacturers, suppliers, factory, gate valve pn 16, floating gate valve, 8 inch gate valve, 2 inch gate valve pvc, solder gate valve, slurry gate valve








